Taizhou Jinhao Dingyi Mould & Plastics Co., Ltd.
Set Homepage | Favorite
0576-84220820
Specialzied in compression mould and injection mould!

Four Stages in Injection Moulding

Issuing time:2020-04-18 14:58

Plastic products are closely related to our life, so injection moulding is also the most important part of the production of plastic products. Good injection moulding can improve the quality of products and improve the customer satisfaction to our injection mould factory.

In the process of injection mould, it mainly includes four stages, such as filling, maintaining pressure, cooling and demoulding, which directly affect the quality of plastic parts. Good plastic parts are produced, the surface of plastic parts looks very smooth, but poor plastic parts are produced, uneven, deformation is very serious, there are burrs and other problems.

Injection mould filling stage

Injection mould filling is the first step in the process of producing plastic parts for all injection moulds. The injection time is from the time when the injection mould is closed to about 95% of the injection mould cavity filling. In the normal production, the shorter the plastic filling time, the higher the product's injection moulding efficiency.

Maintaining pressure stage

The stage of injection mould pressure preservation is also a stage of continuous pressure application. The density of plastic also increases with the increasing pressure of the injection moulding machine. In the process of injection mould pressure preservation, the cavity is slowly filled with plastic, resulting in the injection mould back pressure gradually increased. In the process of pressure preservation, the screw of the injection moulding machine moves forward slowly, and the rate of plastic is relatively slow. In this case, the flow is called pressure preservation flow. In the injection mould pressure preservation stage, the plastic is cooled, resulting in accelerated solidification, increased melt viscosity, and large resistance in the cavity. At the later stage of pressure preservation, the material density continues to increase, and the plastic parts are also moulded by injection moulding. When the gate solidifies, the stage of pressure preservation is finished, and the pressure in the cavity reaches the maximum value.

The cooling stage

The design and arrangement of cooling system are also very important in injection moulding. Because only when the material is cooled to a certain degree of rigidity, plastic products can reduce the deformation due to external forces and ensure the appearance of the products.

Demoulding stage

DemouldingDemoulding stage is the last link in injection moulding, mould release have important effects on products, imprope demoulding method may lead to uneven surface stress and deformation of products during demoulding. There are two kinds of demoulding methods commonly: stripper plate demoulding and ejector demoulding. When we design the injection mould, we should choose the proper demoulding method according to the structural characteristics of the product, so as to ensure the quality of the product.

Under normal circumstances, the injection moulding cycle time consists of filling time, pressure-holding time, cooling time and demoulding time. If any one is missing, waste will be produced.


Online contact
 Work Time
Mon to Sat :8:00-17:00
 Contact Details
Tel:0576-84220820
QQ:2724736464
Email:dymould@aliyun.com
Fax:0576-81103280
Add:No.68 Lianping Road, Shi Guiao Industrial Zone, Huangyan District, Taizhou City, Zhejiang Province 3
Online map
Tel: 0576-84220820         
Email: dymould@aliyun.com
Address: No.68 Lianping Road, Shi Guiao Industrial
Zone, Huangyan District, Taizhou ,Zhejiang,China
Login
Login
Login by:
leave a message
back to the top